China Hot selling 220W 400W 600W Dgt075 Stable Transmission Cycloidal Planyetary Gearbox Fubao wholesaler

Product Description

Product Description

Fubao planetary reducer manufacturers, supply of Dgt075 Stable Transmission Cycloidal Planyetary Gearbox Fubao has the following advantages:

1. Compact structure: the characteristics of large torque planetary reducer is to make full use of space, limited space design bearing and gear ratio, so that the product is smaller than the traditional reducer volume can save space.
 

2. High efficiency: the planetary gear group will be in a completely tight meshing state when running, reducing gear collision or local meshing resulting in gear damage. The completely tight meshing characteristic makes the efficiency loss of each gear transmission only 3%. This type of transmission mode can ensure that the kinetic energy input reducer to the mechanical end of the process, still can maintain high transmission efficiency, avoid the internal gear friction, sliding, mechanical loss.
 

3. High axial and radial load capacity: the output shaft of Fubao technology’s high-torque planetary reducer adopts a large-span style, so that the bearing is configured at both ends of the output shaft. The design can effectively disperse the force acting on the output shaft and reduce the load of the bearing. In other words, the product strengthens the bearing and radial load capacity under the same size.
 

4. High strength: large torque planetary reducer gear group is very strong and stable, the thickness of the gear dispersed the load on the gear. The large span bearing group provides a stable structure, and the precision gear group allows the load to be distributed to each planetary gear under tight meshing to withstand the torque load.
 

5. High stability: precision processing to ensure that the product coaxial and concentric, coupled with bearing large span design, so that large torque planetary reducer with excellent stability.
 

Product Parameters

 

DGT series parameters Model number DGT60 DGT75 DGT100 DGT140 DGT180 DGT220
Rated output torque 40~60Nm 100~150Nm 290~330Nm 342~600Nm 588~1200Nm 1140~1700Nm
Reduction ratio L1:3,5,7,10  L2:9,12,15,16,20,21,25,28,30,30,40,49,50,70
Planetary gear backlash L1:≤5         L2:≤7

Detailed Photos

Product Details

Other products

Company Profile

 

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008. Is a collection of scientific research, sales, service in 1 of the transmission device product supplier, committed to provide customers with good products and automation system solutions.

The company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly, sales in one, in the field of gear manufacturing has more than 10 years of experience. With strong manufacturing capacity, it can steadily and continuously produce high-quality precision reducer products.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction, Speed Increase, Lower The Speed and Increase The Torque
Layout: Coaxial
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

mover gearbox

Adjusting Tension on a Mower Gearbox Belt

Proper tension adjustment of the gearbox belt in your mower is crucial for optimal performance and belt longevity. Follow these steps to adjust the tension:

  1. Preparation: Turn off the mower’s engine and disconnect the spark plug wire to ensure safety.
  2. Locate the Adjustment Mechanism: Identify the tension adjustment mechanism on the mower. This could be a tensioning bolt, an adjustable bracket, or another mechanism depending on the mower model.
  3. Loosen Bolts: If your mower has tensioning bolts, slightly loosen the mounting bolts securing the gearbox in place. This allows the gearbox to move and adjust tension.
  4. Adjust Tension: Use the tension adjustment mechanism to increase or decrease the tension on the belt. Refer to your mower’s manual for recommended tension specifications.
  5. Check Tension: After adjusting, check the tension by pressing down on the belt at a midpoint between the pulleys. The belt should give a little, but not excessively. Also, check for proper alignment of the pulleys.
  6. Tighten Bolts: Once the tension is set correctly, tighten the mounting bolts of the gearbox to secure it in place.
  7. Test Operation: Reconnect the spark plug wire and start the mower to observe the belt’s operation. Listen for any unusual noises and monitor the belt for proper engagement with the pulleys.

Regularly checking and adjusting the tension of the gearbox belt ensures efficient power transmission and prevents premature wear. If you’re unsure about the proper tension adjustment, consult your mower’s manual or seek assistance from a professional.

mover gearbox

Lifespan of a Typical Mower Gearbox

The lifespan of a mower gearbox can vary depending on several factors, including the quality of the gearbox, maintenance practices, usage frequency, and operating conditions. On average, a well-maintained and high-quality mower gearbox can last between 5 to 10 years or even more.

Regular maintenance, such as checking and maintaining the oil level, cleaning and lubricating components, and addressing any issues promptly, can significantly extend the lifespan of a mower gearbox. Quality components, proper usage, and adherence to manufacturer guidelines also play a crucial role in determining how long a mower gearbox will last.

If you start noticing signs of wear, performance issues, or unusual noises from the gearbox, it’s important to address them promptly to prevent further damage and potentially extend the gearbox’s lifespan.

mover gearbox

Role of a Mower Gearbox

A mower gearbox is a crucial component in various types of mowers and lawn maintenance equipment. Its primary role is to transfer power from the mower’s engine to the cutting blades, enabling the blades to rotate and perform the cutting or mulching action. Mower gearboxes are designed to handle the specific requirements of mowing tasks, providing the necessary torque and speed conversion to effectively cut grass, weeds, and other vegetation.

The key functions of a mower gearbox include:

  • Power Transmission: The mower gearbox transfers power generated by the engine to the cutting blades. This power transmission is necessary to rotate the blades at the required speed for efficient cutting.
  • Torque Conversion: Mower gearboxes are designed to convert the high-speed, low-torque output of the engine into the high-torque, low-speed rotation required by the cutting blades.
  • Blade Synchronization: In mowers with multiple cutting blades, the gearbox ensures that all blades rotate at the same speed and remain synchronized. This ensures an even and consistent cutting pattern.
  • Adjustable Cutting Height: Many mower gearboxes are equipped with mechanisms that allow operators to adjust the cutting height of the blades. This feature enables users to customize the lawn’s appearance and accommodate different grass lengths.
  • Direction Control: Some mower gearboxes are designed to provide the ability to switch between forward and reverse directions, allowing the mower to navigate obstacles or change mowing patterns.

Mower gearboxes are available in various designs and configurations to suit different types of mowers, such as rotary mowers, flail mowers, reel mowers, and more. They play a crucial role in ensuring efficient and effective lawn maintenance by delivering the power and torque needed to achieve clean and even cuts.

China Hot selling 220W 400W 600W Dgt075 Stable Transmission Cycloidal Planyetary Gearbox Fubao   wholesaler China Hot selling 220W 400W 600W Dgt075 Stable Transmission Cycloidal Planyetary Gearbox Fubao   wholesaler
editor by CX 2024-03-14