China high quality 90° Angle High Torque Planetary Gearbox for Servo Motor best automatic gearbox

Product Description

90° angle high torque Planetary Gearbox for Servo Motor

This helical planetary gearbox is used for servo motor and related device which need to reduce speed or enlarge torque! CHINAMFG helical planetary gearboxes external diameter from 64 to 110, gear ratio from 3 to 100! It has high precision and are widely used with servo motor such like Panasonnic,Fuji, Mitsubishi, Omran,Delta, Teco.

Product Description

Description:
(1).The output shaft is made of large size,large span double bearing design,output shaft and planetary arm bracket as a whole.The input shaft is placed directly on the planet arm bracket to ensure that the reducer has high operating accuracy and maximum torsional rigidity.
(2).Shell and the inner ring gear used integrated design,quenching and tempering after the processing of the teeth so that it can achieve high torque,high precision,high wear resistance.Moreover surface nickel-plated anti-rust treatment,so that its corrosion resistance greatly enhanced.(3).The planetary gear transmission employs full needle roller without retainer to increase the contact surface,which greatly upgrades structural rigidity and service life.
(4).The gear is made of Japanese imported material.After the metal cutting process,the vacuum carburizing heat treatment to 58-62HRC. And then by the hobbing,Get the best tooth shape,tooth direction,to ensure that the gear of high precision and good impact toughness.
(5).Input shaft and sun gear integrated structure,in order to improve the operation accuracy of the reducer.

Product Parameters

Characteristic:

1.With bevel gear reversing mechanism,right angle steering output is realized;
2.Square flange output,standard size;
3.The input specification are complete and there are many choices;
4.Spur transmission ,single cantilever structurer,design simple,high cost performance;
5.Keyway can be opened in the force shaft;
6.stable operation,low noise;
7.Size range:60-120mm
8.Ratio range:3-100;
9.Backlash:8-16arcmin;
10.Support custom according to drawings or samples

Specifications PVFN60 PVFN90 PVFN120
Technal Parameters
Max. Torque Nm 1.5times rated torque
Emergency Stop Torque Nm 2.5times rated torque
Max. Radial Load N 240 450 1240
Max. Axial Load N 220 430 1000
Torsional Rigidity Nm/arcmin 1.8 4.85 11
Max.Input Speed rpm 8000 6000 6000
Rated Input Speed rpm 4000 3500 3500
Noise dB ≤58 ≤60 ≤65
Average Life Time h 20000
Efficiency Of Full Load % L1≥95%       L2≥92%
Return Backlash P1 L1 arcmin ≤8 ≤8 ≤8
L2 arcmin ≤12 ≤12 ≤12
P2 L1 arcmin ≤16 ≤16 ≤16
L2 arcmin ≤20 ≤20 ≤20
Moment Of Inertia Table L1 3 Kg*cm2 0.46 1.73 12.78
4 Kg*cm2 0.46 1.73 12.78
5 Kg*cm2 0.46 1.73 12.78
7 Kg*cm2 0.41 1.42 11.38
10 Kg*cm2 0.41 1.42 11.38
L2 12 Kg*cm2 0.44 1.49 12.18
15 Kg*cm2 0.44 1.49 12.18
16 Kg*cm2 0.72 1.49 12.18
20 Kg*cm2 0.44 1.49 12.18
25 Kg*cm2 0.44 1.49 12.18
28 Kg*cm2 0.44 1.49 12.18
30 Kg*cm2 0.44 1.49 12.18
35 Kg*cm2 0.44 1.49 12.18
40 Kg*cm2 0.44 1.49 12.18
50 Kg*cm2 0.34 1.25 11.48
70 Kg*cm2 0.34 1.25 11.48
100 Kg*cm2 0.34 1.25 11.48
Technical Parameter Level Ratio   PVFN60 PVFN90 PVFN120
Rated Torque L1 3 Nm 27 96 161
4 Nm 40 122 210
5 Nm 40 122 210
7 Nm 34 95 170
10 Nm 16 56 86
L2 12 Nm 27 96 161
15 Nm 27 96 161
16 Nm 40 122 210
20 Nm 40 122 210
25 Nm 40 122 210
28 Nm 40 122 210
30 Nm 27 96 161
35 Nm 40 122 210
40 Nm 40 122 210
50 Nm 40 122 210
70 Nm 34 95 170
100 Nm 16 56 86
Degree Of Protection   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 1.7 4.4 12
L2 kg 1.9 5 14

Company Profile

Packaging & Shipping

lead time 7-10 working days as usual,15 days in busy season,it will based on the detailed order quantity
Delivery of samples by DHL,Fedex,UPS,TNT,EMS

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Machine Tool Manufacturing
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Spur Gear
Step: Single-Step
Samples:
US$ 392/set
1 set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

mover gearbox

Lubrication Frequency for Mower Gearbox

The frequency of lubricating your mower gearbox depends on the manufacturer’s recommendations, usage intensity, and operating conditions. Here are some general guidelines:

  • Regular Maintenance: It’s recommended to lubricate your mower gearbox at the beginning of the mowing season or after about 25-50 hours of operation.
  • Heavy Usage: If you’re using your mower frequently or in challenging conditions such as dusty or wet environments, you might need to lubricate more often, perhaps every 10-20 hours of operation.
  • Check the Manual: Consult your mower’s user manual for specific lubrication intervals and the type of lubricant to use. Different mowers and gearboxes might have varying requirements.
  • Inspect Regularly: Keep an eye on the gearbox for any signs of oil leakage or unusual noise. If you notice any issues, it’s a good idea to inspect and lubricate the gearbox as needed.

Using the right type of lubricant is crucial for optimal gearbox performance. Make sure to use a high-quality lubricating oil recommended by the manufacturer. Always follow proper lubrication procedures outlined in the user manual to ensure the longevity and efficiency of your mower gearbox.

mover gearbox

Troubleshooting Strange Noises from a Mower Gearbox

If you hear strange noises coming from your mower gearbox, follow these steps to troubleshoot the issue:

  1. Identify the Noise: Determine the type of noise, such as grinding, squealing, or knocking. Different noises can indicate various problems.
  2. Check Lubrication: Insufficient or contaminated lubrication can cause unusual noises. Check the gearbox’s oil level and condition and replace it if necessary.
  3. Inspect Gears and Bearings: Worn, damaged, or misaligned gears and bearings can generate noise. Inspect these components for wear, chipping, or misalignment.
  4. Tighten Fasteners: Loose bolts and fasteners can lead to vibration and noise. Check and tighten all fasteners connecting the gearbox to the mower.
  5. Check Belt Tension: A loose or misaligned drive belt can cause noise. Adjust the belt tension according to the manufacturer’s guidelines.
  6. Inspect Clutch Components: If your mower has a clutch, worn or damaged clutch components can create noise. Inspect the clutch assembly for any issues.
  7. Examine Blade Components: If the noise is related to blade engagement, check the blade assembly for damage, alignment, and balance.
  8. Clean Debris: Debris, dirt, and grass clippings can accumulate in the gearbox and cause noise. Clean the gearbox thoroughly and remove any obstructions.
  9. Seek Professional Help: If you can’t identify or fix the issue, consult a professional technician or service center for diagnosis and repair.

Regular maintenance and prompt identification of unusual noises can help prevent further damage and ensure the smooth operation of your mower gearbox.

mover gearbox

Type of Oil for Mower Gearbox

Choosing the right oil for your mower gearbox is essential for optimal performance and longevity. The specific type of oil you should use depends on the manufacturer’s recommendations and the design of your mower gearbox. Here are the key factors to consider:

  • Manufacturer’s Guidelines: Always refer to the manufacturer’s manual or guidelines for the recommended type and viscosity of oil to use in your mower gearbox.
  • Viscosity: The viscosity of the oil determines its thickness and ability to flow. Mower gearboxes typically require oils with specific viscosity ratings, such as SAE 80W-90 or SAE 90. These oils provide the right balance of lubrication and protection.
  • Extreme Pressure (EP) Properties: Mower gearboxes experience high loads and pressures. Choose an oil labeled as “Extreme Pressure” (EP) as it contains additives that provide extra protection under heavy loads and prevent wear.
  • Synthetic vs. Conventional: Synthetic oils offer enhanced performance and stability over a wide range of temperatures. They also provide better protection against heat and oxidation. However, consult the manufacturer’s guidelines to ensure compatibility.
  • Usage Conditions: Consider the operating conditions of your mower. If you frequently mow in hot weather or under heavy loads, opt for an oil that can handle these conditions without breaking down.
  • Quality: Choose high-quality oils from reputable brands to ensure consistent performance and protection for your mower gearbox.
  • Oil Change Intervals: Follow the recommended oil change intervals specified by the manufacturer. Regular oil changes help maintain optimal lubrication and prevent excessive wear.
  • Compatibility: Ensure that the oil you choose is compatible with any seals, gaskets, and materials used in your mower gearbox.

Ultimately, using the correct type of oil in your mower gearbox will help maintain smooth operation, reduce friction, and extend the lifespan of the gearbox components.

China high quality 90° Angle High Torque Planetary Gearbox for Servo Motor   best automatic gearbox	China high quality 90° Angle High Torque Planetary Gearbox for Servo Motor   best automatic gearbox
editor by CX 2024-03-08