China factory Worm Gearbox Used in Paper Industry bevel gearbox

Product Description

The gearbox  is generally used for low-speed and high-torque transmission equipment. The power of the electric motor, internal combustion engine or other high-speed operation is achieved through the gear of the input shaft of the reducer meshing with the large gear on the output shaft. The ratio of the number of teeth is the transmission ratio.There 4 type gearbox for paper mill,pls check the follow informations:

Worm/spiral bevel gearbox reducer
1. The F series parallel shaft helical gear reducer is manufactured in accordance with international technical requirements and has a high technological content.
2. It saves space, is reliable and durable, has high overload capacity, and the power can reach more than 90KW.

3. F parallel shaft helical gear reducer has low energy consumption, superior performance and efficiency as high as 95%.
4. Parallel shaft helical gear reducer has low vibration, low noise and high energy saving. It is made of high-quality steel material, rigid cast iron box, and the surface of the gear is high-frequency heat treated.
5. After precision machining, the shaft parallelism and positioning accuracy are ensured. All of this constitutes the gear transmission assembly. The reducer is equipped with various motors, forming a mechatronics, which fully guarantees the quality characteristics of the geared motor products.
 
2.Features:
1. Parallel output, compact structure, large transmission torque, stable operation, low noise and long life.
2. Installation method: base installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
3. The rotation direction of the input and output of the basic two-stage is the same, and the three-stage is opposite; another consultation is needed for F/R combination.
4. Output mode: hollow shaft output or CHINAMFG shaft output.
5. Average efficiency: 96% for level two, 94% for level three, and 85% for F/R combination.

 3. Technical parameters:

Speed ratio range: basic type 3.81~281.71, F/R combination type can reach 31434
Torque range: 200~18000 Nm
Power range: 0.18~200 kW

1. The S series helical gear worm reducer has a high technological content. It has a combination of helical gear and worm gear for integrated transmission, which improves the torque and efficiency of the machine. This series of products have complete specifications, wide speed range, good versatility, adapt to various installation methods, safe and reliable performance and long life, and have implemented international standards.
  2. The surface of the body has a heat dissipation effect, strong vibration absorption, low temperature rise and low noise.
  3. The machine has good sealing performance and strong adaptability to the working environment.
  4. The helical gear worm gear reducer has high transmission accuracy, which is especially suitable for working in occasions with frequent starting. It can be connected to various reducers and equipped with various types of motor drives. It can be installed in a 90 degree transmission operation.
position.
  5. The key components of the S helical gear reducer are made of highly wear-resistant materials and have undergone special heat treatment. They have the characteristics of high machining accuracy, stable transmission, small size, large carrying capacity, and long life.
  6. The helical gear reducer can be equipped with various types of motors, forming an electromechanical integration, which fully guarantees the quality characteristics of the product.
 
2.Features:
  1. Combination of helical gear and worm gear, compact structure and large reduction ratio.
  2. Installation method: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
  3. Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
  4. Average efficiency: reduction ratio of 7.5-69.39 is 77%; 70.43-288 is 62%; S/R combination is 57%.
  5. Combine with R series to get larger speed ratio.

3. Technical parameters:
 

Speed ratio range: basic type 9.96~244.74, S/R combination type can reach 8608
Torque range: 43~4200 Nm
Power range: 0.18~22 kW

 

About Us

ZheJiang CHINAMFG Paper Tech

We are a China Based engineering company and machinery supplier committed to offer complate solution and provide high-cost-performance equipments related to stock preparation and paper-making industry.For years,we have insisted on taking customer’s value as our center and having strict quality-control and innovation in the whole process. 

With advantage technology and excellent equipment,we provide one-stop service from consultation,process design and optimization,manufacture,installation,commissing and personnel training and so on.At the same time,we can supply all kinds of stock preparation and paper making equipment and accessories.Besides,we can custom design according to customers’ requirements.

Our products have reliable quality and superior performance and have been exported to Poland,Greece,Turkey,Iran,India,Packistan,Bangladesh,Thailand,Indonesia,Philippines,Malaysia,Vietnam,Mexico,Guatemala,Costa Rica,Columbia,Egypt etc.We have established long-term cooperation relationship with many paper mills and agent.

Honesty,cooperation and CHINAMFG are important to us.We insisted on serve our customers with high quality products,sincere service and good reputation.We are appreciated for the long-term trust and favor from our customers.Hope we can cooperate sincerely and make progress together with our new and old customer.

Customer’s satisfaction is our goal !

Contact us to have more details about “Gearbox “Parallel shaft helical gear reducer
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery, Paper Mill
Function: Distribution Power, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Customization:
Available

|

Customized Request

mover gearbox

Repair or Replacement of a Mower Gearbox

Whether a mower gearbox can be repaired or needs to be replaced depends on the extent of the damage and the condition of the gearbox components. Here are some factors to consider:

  • Minor Issues: If the gearbox is experiencing minor issues such as a leaking seal, damaged gasket, or a loose bolt, these problems can often be repaired without the need for a full replacement.
  • Worn Gears or Bearings: If the gears or bearings are worn or damaged, they can sometimes be replaced individually, especially if the rest of the gearbox is in good condition.
  • Severe Damage: If the gearbox housing is cracked, the gears are severely damaged, or the entire unit is extensively worn, a replacement gearbox might be the more cost-effective solution.
  • Cost of Repairs: Sometimes, the cost of repairing multiple components in a gearbox can be close to the cost of a new gearbox. In such cases, it might make more sense to opt for a replacement.
  • Age of the Mower: If the mower itself is old and the gearbox is showing signs of wear, it might be worth considering whether it’s more economical to invest in a new mower with a new gearbox.

It’s recommended to consult a professional mechanic or technician who specializes in mower repairs. They can assess the extent of the damage, provide you with repair and replacement options, and help you make an informed decision based on the specific situation.

mover gearbox

Differences between Manual and Automatic Mower Gearboxes

Manual and automatic mower gearboxes differ in their operation, control, and convenience:

  • Operation: Manual gearboxes require the user to engage and disengage gears manually using a clutch or lever. Automatic gearboxes, on the other hand, change gears automatically based on speed and load conditions.
  • Control: Manual gearboxes provide more direct control over gear selection, allowing the user to choose the appropriate gear for specific tasks. Automatic gearboxes, however, offer a hands-free experience with gear changes managed by the gearbox itself.
  • Convenience: Automatic gearboxes are more convenient for users who prefer a hassle-free experience. They eliminate the need to manually shift gears, making operation simpler and more user-friendly.
  • Complexity: Automatic gearboxes are more complex in design compared to manual ones due to the presence of sensors, electronic controls, and additional components required for automatic shifting.
  • Efficiency: Manual gearboxes can provide better control over power delivery and may be more efficient in certain situations. However, automatic gearboxes optimize gear changes for fuel efficiency and performance.
  • Cost: Automatic gearboxes are generally more expensive to manufacture and repair due to their complexity. Manual gearboxes are simpler and often more affordable.

The choice between manual and automatic mower gearboxes depends on user preference, the level of control desired, and the intended use of the mower. Both types have their advantages and disadvantages, and the decision should be based on the user’s needs and priorities.

mover gearbox

Key Components of a Mower Gearbox

A mower gearbox is a complex mechanical assembly consisting of various components that work together to transmit power and control the cutting blades. The key components of a mower gearbox include:

  • Input Shaft: The input shaft is connected to the mower’s engine via a drive shaft. It receives the rotational power from the engine and transfers it to the gearbox.
  • Gears: Gears are essential components responsible for transmitting and converting torque and speed. Mower gearboxes contain a set of gears, including input gears, intermediate gears, and output gears, that mesh together to achieve the desired torque and speed ratios.
  • Output Shaft: The output shaft is connected to the cutting blades. It receives the torque from the gearbox and transfers it to the blades, causing them to rotate and perform the cutting action.
  • Bearings: Bearings support the rotating shafts and gears within the gearbox, reducing friction and ensuring smooth movement. Ball bearings or roller bearings are commonly used to enhance the gearbox’s efficiency and longevity.
  • Lubrication System: Mower gearboxes require proper lubrication to minimize friction and wear between moving parts. Lubrication ensures that the gears and bearings operate smoothly and efficiently.
  • Housing: The gearbox housing encloses and protects the internal components from external elements. It also contains the lubricating oil and prevents dirt and debris from entering the gearbox.
  • Seals: Seals prevent the entry of contaminants such as water, dust, and dirt into the gearbox. They play a critical role in maintaining the integrity of the lubrication system and protecting the internal components.
  • Clutches and Brakes: Some mower gearboxes feature clutches and brakes that allow for engagement and disengagement of the cutting blades. These components provide control over the cutting action and enable safe operation.
  • Adjustment Mechanisms: Depending on the type of mower, the gearbox may include adjustment mechanisms for setting the cutting height or angle of the blades. These mechanisms enhance the mower’s versatility and performance.

The combination of these components within the mower gearbox ensures the effective transmission of power and precise control over the cutting blades, resulting in efficient and accurate mowing operations.

China factory Worm Gearbox Used in Paper Industry   bevel gearbox	China factory Worm Gearbox Used in Paper Industry   bevel gearbox
editor by CX 2024-04-04